H-22 MOUNTING INSTRUCTIONS
1. Insert potentiometer in panel.
2. Install anti-rotation device using hardware supplied withpotentiometer.
3. Turn potentiometer shaft counterclockwise to minimumresistance or voltage ratio.
4. Set the dial to "0.0" and brake on.
5. Insert the dial on the potentiometer shaft lightly against thepanel.
6. Tighten set screw to potentiometer shaft.

Mechanical and Physical Characteristics
Number of Turns : 0 ~ 15
Dial Divisions : 50 per turn
Readability – Over 10 Turns: 2 parts in 1000
Torque With Brake Engaged : 500 g-cm min
Markings: Black on satin chrome background or white onblack background
Locking Brake: Yes
Weight: 15 grams
Set Screw: UNC N2-56, one included
Set Screw Tightening Torque: 16.94 N-cm min
Hex Key Size: 0.05 in. hex

Shaft and Bushing Requirements
Shaft Diameter Requirements: Refer to chart below
Shaft Extension Beyond Panel: 18.1 mm Min 22.2 mm Max
Bushing Extension Beyond Panel: 9.53 mm Max